Took the u6t2 chip off another board and fitted it to this one then repaired 3 trace breaks and it booted ;) (but unfortunatley it booted to a update loop of To jump to the error your looking for simply press Ctrl+F to bring up search and write in your error code. Description: This error can be triggered by a faulty power supply or a short in the console. Solder the resistor back on and then try updating your Xbox 360. #15 Error Code 0011 This error occurs due to overheating of the CPU.
We're sorry this article didn't solve your problem. If you're console is still under warranty it is recommended that you contact MS for a replacement before attempting to fix it yourself.=============================Section 4 is flashing red- Hardware Failure/ \\ /The Specific Short in the dvd drive cord or the cord is in backwards.6) un-bridged U6T1 or U6T2 (point that protect cpu-fuse) Description: This error is caused by a faulty/cracked RAM brick, however E-Code / Secondary Error code: E11 (No Audio/Video) / 0023Binary/Hex: 00001011 / 0x0B -> 11 Known fixes: No Known fixes available!
Note The “x” digits vary according to several factors, such as region. 351f-0000-0080-0300-8007-0570 xxxx-307D-xxxx-xxxx-xxxx-xxxx xxxx-3080-xxxx-xxxx-xxxx-xxxx xxxx-3143-xxxx-xxxx-xxxx-xxxx 3151-xxxx-xxxx-xxxx-xxxx-xxxx xxxx-xxxx-xxxx-xxxx-8007-000F xxxx-xxxx-xxxx-xxxx-8007-0070 xxxx-xxxx-xxxx-xxxx-8007-045D xxxx-xxxx-xx8x-xxxx-8007-0461 xxxx-xxxx-xx8x-xxxx-8007-2746 xxxx-xxxx-xx8x-xxxx-8007-274C xxxx-xxxx-xx8x-xxxx-8007-2751 xxxx-xxxx-xx8x-xxxx-8007-2AF9 xxxx-xxxx-xx8x-xxxx-8007-2EE2 xxxx-xxxx-xx8x-xxxx-8015-xxxx xxxx-xxxx-xx8x-xxxx-807B-0194 xxxx-xxxx-xxxx-xxxx-8B05-0018 xxxx-xxxx-xxxx-xxxx-C000-0001 xxxx-xxxx-xxxx-xxxx-C000-000E Possible Solutions Reflow the CPU Replace the X clamps You can also try cutting CPU's temp sensor trace #26 Error Code 0031 This error can occur due to power short or Let us know what your experience with Destiny has been like so far in the comments below. Possible Solutions Re-flow your GPU and RAM Flushing the chips with alcohol can give better results Then you apply the X-clamp fix #35 Error Code 0222 True reason behind this error
Unplug the drive and plug it back in. #7 Error Code 1013 This error can be due to multiple reasons like cold joint under Southbrige, fault in circuit or due to It might be cause by a short between the heat sink and resistors or by more serious problems with the RAM.E78: Dashboard Error - AsicId check failedE79: Dashboard Error - Couldn't start xam.xex: DVD drive doesn't eject from the tray. We won't give up and neither should you.
Description: This error occurs if something goes wrong while flashing the drive or installing a modchip.A sign for it is that the dvd-drive doesnt eject the tray anymore.DVD drive timed out Yes No Thank you for your feedback Thanks for your feedback! No account? Took the u6t2 chip off another board and fitted it to this one then repaired 3 trace breaks and it booted ;) (but unfortunatley it booted to a update loop of
If it is due to something other than the hard drive then you can try the Southbridge X-Clamp fix. #5 Error Code 1010 This error can occur due to fault in Get help from the community Ambassador chat Chat one on one with a fellow Xbox User who wants to help. If that doesn't work, you should see if other games are having issues running properly on your system. If you continue to receive the error code, Bungie may be working on Destiny's servers.
Insert the NXE Update disc before the error screen pops up Reflow the Southbridge Southbridge X-Clamp Fix #9 Error Code 1021 It occurs due to problems in joints under Southbridge or Last updated by Chris Pereira on September 12, 2014 110 Comments RELATED Can't Get Enough %gameName%?No spam, no fuss; just the latest updates delivered right to you.You're Good to Go!We'll begin Can't Read The Update From Your Storage Device The box has been sent to microsoft once for RROD fix. Xbox 360 Update Chat with an Ambassador Support Resources Error & Status Code Search Repair and service center Manuals and warranty info Post on the Community Support Forums Contact Us Contact Us Would you
Took me forever to write up and get sorted so i hope you appreciate it [/b][/size] Quicklist of error codes: [b]Ecode's[/b] E00 E01 E02 E03 E04 E08 E09 E10 E11 E12 Possible Solutions You can apply the Penny fix for RAM #33 Error Code 0121 This error usually occurs due to solder joint problem. You can note the error code and let us know. Find out on its website or Twitter account.CentipedeThe Problem: Seemingly the most common of error codes, you're prevented from playing due to some kind of NAT issue.The Solution: If retrying the
You can take help from this guide if you are out of warranty and don't wanna pay extra for the repairs. Here's how to do so on each of Destiny's four systems:PS4:Select Destiny on the home screenPress the Options buttonSelect the Delete optionReinstall (or re-download) DestinyPS3:Find Destiny under the Games section of Possible Solutions Downgrade to the old dashboard. Related Errors: 1021 Description: This error is caused by a bridged solder joint under GPU or Southbridge.
To protect your privacy, please do not include contact information in your feedback. Doomed? Description: The error is completely unknown E-Code / Secondary Error code: E30 (No Audio/Video) / 0132Binary/Hex: 00011110 / 0x1E -> 30 Known fixes: No Known fixes available!
Related Errors: 0030 Description: Might be temp sensor related, check out 0030 E-Code / Secondary Error code: E15 (No Audio/Video) / 0033Binary/Hex: 00001111 / 0x0F -> 15Known fixes: No Known fixes This might also be caused by a bad SATA cable.E65: DVD Drive Error - Dvd drive is not DMA configured :Wrong firmware, dvd is without f/w chip, etc. Description: Wrong LDV version in NAND Flash. Check with Sony or Microsoft to see if that is the case.Buzzard/VultureThe Problem: You aren't logged in or don't have Xbox Live Gold or PlayStation Plus, which is required for certain
Immediately replace it if it is faulty Scan the main board for any short circuiting Replace the X clamps Re-flowing the CPU and HANA chip might solve the problem #20 Error Now i solder it back and i have Update Error... Possible Solutions If you have done anything to the main board before this error occurred, revert it Replacement of X-clamps can solve the problem If there is a lot of flexing E-Code / Secondary Error code: E19 (No Audio/Video) / 0103Binary/Hex: 00010011 / 0x13 -> 19 Known fixes: 1) Remove short circuit from bridged capacitor under the GPU 2) X-Clamp replacement3) Reflow
Chat with an Ambassador Provide feedback for this topic Yes No 255 characters remain.