Replace Drive 208 SMART status failed after the media scan. The drive may not have been accessed properly possibly due to a bad connection. Isn't it supposed to be testing the drive itself? Retest. Source
There are too many errors detected on this drive to be repaired. Re-test Drive 141 UNKNOWN ERROR An unknown error has occurred during testing. Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. Replace the drive if the error repeats.
Drive should be replaced. A clicking noise can indicate that this error has occurred. If you can get it into a system running an OS (e.g. This may be an anomaly.
Replace the drive if the error repeats. Retest after checking the connections. Replace Drive 570 No Recalibration Recalibration command failed. This may be due to a media error.
This may be an anomaly. Between two to nine errors have been detected. If the error repeats, replace the drive. Please contact the system vendor for the above-mentioned information.
Track 0 on the drive must be accessed to perform parts of various internal tests. Re-Test Drive 8 Read Sector Failure A Read command during the test has failed. Are suitable to be used as Backup drive, Switched on twice/day for 2 hour and the switch off? Retest after checking the connections.
Just PM me how much you want and will exchange info.Absolutely no need to pay me -- I enjoy helping users of the BBR/DSLR community, and I'd rather spare hardware I How do you backup a 1 TB drive with about 250Gb used so far? Replace the drive if the error repeats. Drive should be replaced.
This is the pretest initialization code which indicates a drive is ready to be tested, but has not yet been tested. this contact form The drive has not responded back in the time allotted. Click the Kudos star to say thank you for helpful posts. There may be repairable media errors on a platter.
Replace the drive if the error repeats. Replace the drive if the error repeats. If the error repeats, replace the drive. have a peek here Western digital 1tb wd tv P3200BT installation manual but ewstern instructions western digital 0225 code error them would manual western digital 0225 drive error for features manul.
I kinda figured... Click the Kudos star to say thank you for helpful posts. Power off, reconnect SATA and power back up.
Check cabling & retest. Retest after checking the connections. Here's the condition of that Western Digital Caviar Black 1TB drive (/dev/sda):SMART Attribute 5 indicates there have been 150 reallocated LBAs on the disk. Computer Help Jul 1, 2016 Your name or email address: Do you already have an account?
SERVO is data on track location. Replace Drive 13 Failed to Repair Sector A test failed to repair bad sectors. Re-test Drive with appropriate diagnostic utility 133 Illegal ID FW overlay not found. Check This Out With DLGDIAG 5.2 in DOS the Extended Test says ERROR CODE 0225 “Too many errors found, please contact techincal support”.
Replace. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. This error can occur on non-Western Digital drives. Drive should be replaced.
Replace the drive if the error repeats. Yes, my password is: Forgot your password?